Production Lines |
Slitter |
Paintline |
| Equipment Description |
Loop & Tension Slitter |
Tandem Coating Line with
Chemical Coater |
| Base Material (substrate) Capabilities |
Cold Rolled, Galvanized, Stainless Steel,
Galvalume®, Aluminum |
Cold Rolled, Galvanized, Stainless Steel,
Galvalume®, Aluminum |
Maximum coil weight, unicoiler / recoiler |
50,000 lbs. / 50,000 lbs. |
20,000 lbs. / 20,000 lbs. |
| Unicoiler width, min / max in inches |
20" / 62" |
13" / 30" |
| Recoiler width, min / max in inches |
n/a / 60" |
13" / 30" |
| Unicoiler I.D. min / max in inches |
20" / 20" |
16" / 20" |
| Recoiler I.D. min / max in inches |
20" / 20" |
16" / 20" |
| Maximum coil O.D. in inches |
72" |
72" |
| Steel gauge: min / max in inches |
.006" / 0.040" |
.006" / .030" |
| Aluminum gauge: min / max in inches |
.009" / .100" |
.009" / .070" |
| Max. cross section Steel / Aluminum (sq. in) |
n/a |
.751" / 1.875" |
| Recoiler stagerwind capability |
No |
Yes |
|
| Minimum slit mult width |
2" |
n/a |
| Maximum number of cuts |
14 |
n/a |
| Slit width tolerance |
+/- 0.005" per mult |
n/a |
| Edge trim required |
0.250" per side |
n/a |
|
Material Handling |
|
| Max. coil weight handled by crane |
50,000 lbs. |
| Max. coil weight handled by forklift |
30,000 lbs. eye horizontal 20,000 lbs. eye vertical |
| Max. coil weight that can be handled in a closed top truck or trailer |
12,000 lbs. |
| Coil tipping capabilities |
30" wide by 72" O.D. 20,000 lbs. |
